23.5-25 Bias OTR Tires
23.5-25 Bias OTR Tires for Loader, Dozer, and earthmoving Applications
23.5-25 Tires for Heavy Equipment Applications
23.5-25 OTR tires are used on compatible heavy equipment operating in construction, earthmoving, material-handling, quarry and other off-road environments. Depending on the individual tire model, tread pattern and technical specification, this size may be suitable for wheel loaders, dozers, and other compatible earthmoving machines.
The 23.5-25 marking indicates a nominal section width of 23.5 inches and a nominal rim diameter of 25 inches. In conventional OTR tire notation, the symbol “-“ generally indicates bias construction.
Tires sharing the 23.5-25 size designation can differ in ply rating, load capacity, approved rim, inflation pressure, tread depth, TRA classification, casing design and compound. These differences affect traction, wear, heat generation and resistance to cuts, impact and abrasion.
Browse the available 23.5-25 tire models below. To receive a recommendation or quotation, send us your machine model, current tire marking, operating conditions, required quantity and delivery destination.
Available 23.5-25 OTR Tire Models
23.5-25 vs. 23.5R25: What Is the Difference?
| Size marking | Typical construction | Key point |
|---|---|---|
| 23.5-25 | Bias | No “R” appears in the conventional size marking. |
| 23.5R25 | Radial | The letter “R” identifies radial construction. |
23.5-25 OTR Tire Applications
Wheel Loader Applications
Selected 23.5-25 L-series tires are suitable for compatible wheel loaders used in loading, stockpiling and material-handling operations. Selection should consider payload, operating surface, travel distance, speed, loading frequency and exposure to cuts or impacts.
Dozer Applications
Depending on the individual tire model and machine requirements, 23.5-25 tires may be used on compatible wheeled dozers. Tread pattern and depth should be selected according to traction requirements, surface conditions, operating speed and the risk of tread or casing damage.
Earthmoving Operations
Earthmoving operations can involve rock, gravel, loose material, hard-packed ground and abrasive surfaces. Suitable tread depth, casing strength and compound should be selected according to travel distance, speed, load and the severity of the working environment.
How to Select a 23.5-25 OTR Tire
Matching the size marking is only the first step when selecting a 23.5-25 tire. Review the following information before ordering:
- Construction: confirm that the machine requires or permits bias tires.
- Complete tire marking: check the size, ply rating, load symbol and any additional sidewall information.
- Machine compatibility: verify the equipment model, wheel position, approved rim and clearance.
- Load and inflation: follow the tire and equipment manufacturers’ load, pressure and speed recommendations.
- Operating surface: consider soil, gravel, rock, sand, debris, hard ground and abrasive material.
- Duty cycle: review payload, loading frequency, travel distance, speed, operating hours and ambient temperature.
- Tread pattern: select traction, rock, deep-tread or other patterns according to the actual service conditions.
- Tube requirements: confirm whether the selected model is tube-type or tubeless and use compatible components where required.
Do not select a tire solely by size or tread appearance. Confirm the technical specification of the individual tire model before installation.
Available TRA Classifications for 23.5-25 Tires
TRA codes describe the intended service category and tread-depth classification of OTR tires. The codes actually available in 23.5-25 depend on the product model.
- E-3: an earthmover classification associated with regular-depth tread for compatible transport and earthmoving service.
- L-3: a regular-depth loader and dozer classification for general service.
- L-5: an extra-deep loader and dozer classification for selected severe rock and high-damage-risk applications.
Not every 23.5-25 tire is available in every classification. A deeper tread is not automatically better because tread depth can influence heat generation, speed capability and suitability for longer travel cycles.
Learn more in our guide to TRA codes for OTR and industrial tires.
23.5-25 Tire FAQ
Q1：What does 23.5-25 mean?
23.5 indicates the tire’s nominal section width in inches, while 25 indicates the nominal rim diameter in inches. In conventional OTR tire notation, the absence of the letter “R” generally identifies bias construction. Actual dimensions, approved rims, ply ratings and load capacities vary by tire model.
Q2：What equipment uses 23.5-25 tires?
The 23.5-25 tires listed on this page are generally designed for compatible loaders and wheeled dozers. They can also be applied to some uncategorized earthmoving equipment. Actual fitment depends on the machine model, wheel position, approved rim, load requirements, and operating conditions.
Q3：What is the difference between 23.5-25 and 23.5R25?
23.5-25 generally identifies bias construction, while 23.5R25 identifies radial construction. Although both have a nominal 23.5-inch section width and a 25-inch rim diameter, they have different casing constructions and operating characteristics. They should not be considered automatically interchangeable.
Request a Quote for 23.5-25 OTR Tires
Need help sourcing a 23.5-25 OTR tire? Send us your machine model, current tire marking, application, required quantity, and delivery destination. Our team can help identify suitable tire options for your application.